Herunterladen Diese Seite drucken

Hitachi RAS-25QH1 Technische Information Seite 37

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2 Press the ©
3 Set the current time with the
4 Press the © (TIME) button again.
(TIME) button.
TIMER control button.
The time indication starts lighting
instead of flashing.
* The time indication will
sis
emis automatically in
PoO4
sk D> LI » 0
O0g. 37 RET
mw oad
ww
EFC
button twice.
The setting of the current
el The current time is 1:30 p.m.
time is now-complete.
2 Set the turn-off time with the
3 Point the signal window of the remote controller toward the indoor
TIMER control button.
unit, and press the | (RESERVE) button.
The © (OFF) mark starts lighting instead of flashing and the sign ©
>
a
(RESERVED) lights. A beep occurs and the © (TIMER) lamp lights on
Nie
.,
the indoor unit.
> 70% ' i aa
Example: The device will turn off at 11:00 p.m.
ee
The setting of turn-off time is now complete.
2 Set the turn-on time with the
3 Point the signal window of the remote controller toward the indoor
TIMER control button.
unit, and press the | (RESERVE) button.
The 1(ON) mark starts lighting instead of flashing and
© (RESERVED)
sign lights. A beep occurs and the © (TIMER) lamp lights on the indoor
>
LY
unit.
@
py
ee renr
J
moran
Example:
is
The setting of the turn-on time is now complete.
4 Set the turn-on time with the
5 Point the signal window of the remote controller toward the indoor
TIMER control button.
unit, and press the I (RESERVED) button.
The (ON) mark starts lighting instead of flashing and the ©
(RESERVED) sign lights. A beep occurs and the © (TIMER) lamp lights
on the indoor unit.
A
Om
i329
°
5
Example:
V
pw iuys
ts
mt
The device will turn off at 10:30 p.m. and it will bs
Oo»
¥
xf
ie
tumed on at 7:00 a.m.
Slam Aa
oo"
: aa 71:0]
The settings of the turn-on/off times are now
i S
bede
complete.
e The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
the current time at first because it serves as a reference.
e As the time settings are stored in memory in the remote controller, you only have to press
the@\(RESERVE) button in order to use the same. settings next time.
45's

Werbung

loading

Diese Anleitung auch für:

Ras-32qh1Ram-80qh1Ras-40qh1