Hitachi RAS-25QH1 Technische Information Seite 32

HEATING OPERATION
Da Fa Sa I Np aa Oe]
e Use the device for heating when the outdoor temperature is under 21°C.
When it is warm (over 21°C), the heating function may not work in order to protect the
device.
e In case the ambient temperature is low in heating operation, cold air may come out.
In this case it is recommended to use other heating appliances in addition to this room
air conditioner.
Press the FUNCTION selector so that the display indicates ©
(HEAT).
Set the desired FAN SPEED with the ~ (FAN SPEED) button (the
display indicates the setting).
c5 (AUTO): The fan speed changes automatically
according to the temperature of the air which
blows out.
oO (Hl) : Economical as the room will become warm
quickly.
But you may feel a chill at the beginning.
(MED) : Quiet.
(LOW) :More quiet.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
The range of 18-22°C is recommended as the
an room temperature for heating.
If the temperature setting is 20, the room
temperature will be controlled at around 20°C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the @ (START/STOP) button. Heating operation starts
with a beep. Press the button again to stop operation.
i As the settings are stored in memory in the remote controller, you only
have to press the () (START/STOP) button next time.
- 30-