Fan Operation - Hitachi Ras-25Qh1 Technische Information

FAN OPERATION
You can use the device simply as an air circulator. Use this function to dry the interior of
the indoor unit at the end of summer.
HITACHI
—
wa
+
a For the heating operation :
axe) (ilzmezele) late me) el-1ec} (cela)
Press the FUNCTION selector so that the display indicates
(FAN).
Press the -& (FAN SPEED) button and select the desired
FAN SPEED (the display indicates your choice).
Press the @ (START/STOP) button. Fan operation starts
with a beep. Press the button again to stop operation.
@ The fan speed will automatically change according to the temperature
of discharged air.
@ After room temperature reaches the preset temperature, the heating
operation ("WARMTH" heating operation) with the blowing direction of
the air alternating between up and down using horizontal air
deflectors, will be performed.
@ Note that the WARMTH heating operation, horizontal air deflectors
cannot be controlled using the AUTO FAN button.
@ Operation starts in the "HI" mode to reach the preset temperature.
@ After room temperature reaches the preset temperature, the cooling
operation, which changes the fan speed and room temperature to
obtain optimum conditions for natural healthful cooling will be
performed.
- 33 -