Hitachi RAS-25QH1 Technische Information Seite 34

COOLING OPERATION
Use the device for cooling when the outdoor temperature is 22-42°C.
If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of
the indoor unit.
Press the FUNCTION selector so that the display indicates
(COOL).
Set the desired FAN SPEED with the - (FAN SPEED) button
(the display indicates the setting).
© (AUTO): The FAN SPEED is HI at first and varies to
MED automatically when the preset
temperature has been reached.
oO :
ee (Hl) : Economical as the room will become cool
quickly.
RY (MED) : Quiet.
(LOW) : More quiet.
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
The range of 25-28°C is recommended as the
room temperature for cooling. If the temperature
setting is 27, the room temperature will be
controlled at around 27°C.
The temperature setting and the actual room temperature may
vary somewhat depending on conditions.
Press the © (START/STOP) button. Cooling operation starts
with a beep. Press the button again to stop operation. The
cooling function does not start if the temperature setting is
higher than the current room temperature (even though the @
(OPERATION) lamp lights). The cooling function will start as
soon as you set the temperature below the current room
temperature.
@ As the settings are stored in memory in the remote controller, you only
have to press the © (START/STOP) button next time.
- 32-