Werbung
Verfügbare Sprachen
Verfügbare Sprachen
© SEL/ASN Key
and PARAM modes.
. When the MEMORY mode is active this key
reverses the order of the MOD and REV processing
stages.
|
[See page 10 for further details]
[See page 21 for further details]
© BYPASS Key
When the BYPASS key is pressed and "BYPASS"
appears on the display panel, all FX500 effect stages
are completely bypassed and the input signal is fed
directly to the output. Press the BYPASS key a second
time to turn the bypass function off. The rear-panel
BYPASS footswitch jack can also be used for bypass
control (see "Ө BYPASS Jack" on page 5).
© MEMORY Mode Key and Indicator
[See page 9 for further details]
@ RECALL Key
program.
{See page 9 for further details]
@ STORE Key
After editing any of the effect programs, the new
program can be stored in any of the FX500's RAM
memory locations (61 through 90) for later recall and
use. The STORE key is used to store edited data to a
RAM memory location.
[See page 12 for further details]
(B PARAM Mode Key and Indicator
[See page 11 for further details]
(B UTILITY Mode Key and Indicator
* Program Title Edit [Page 19]
* MIDI Setup [Page 20]
+ Program Change Table Edit [Page 20]
• Control Change 1 Table Edit [Page 21]
• Control Change 2 Table Edit [Page 21]
• Foot Switch Function Select [Page 22]
• Foot Switch Memory Recall Range Edit [Page 23]
Werbung
