Yamaha FX500 Bedienungsanleitung Seite 19

I ТҮР L-DLY R-DLY {TYP FB L/R RVT
R+D 190.0 380.0 R+D 43 L=R 2.4
| ТУР R/D MIX LVL
R+D 50 0 0
L-DLY (Left Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the left channel.
R-DLY (Right Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the right channel.
FB (Feedback: 0 — 100 %)
Determines the amount of effect-sound feedback returned
to the input of the processor. Higher values produce a a
greater number of repeats.
L/R (L/R Channel Delay Level Balance: 0 — 100 %)
Sets the left-to-right channel balance of the delay sound
level. Higher values produce higher-level delay sound from
the left channel, and smaller values produce a high-level
delay sound from the right channel.
RVT (Reverb Time: 0.3 — 40 s)
Sets the duration of the reverb effect.
R/D (Reverb/Delay Level Balance: 0 — 100 %)
Determines the balance between the level of the reverb
and delay sound. Higher values produce a greater
proportion of reverb sound, while smaller values produce a
greater proportion of delay sound.
MIX (Mixing Balance: 0 — 100 %)
Sets the balance between the direct and effect sound.
Higher values produce a greater proportion of effect sound
in relation to direct sound.
LVL (Output Level: -41 — 46 dB)
Determines the output level of the effect.
e Reverb and Delay Group (Serial)
* Delay — Reverb (D — R)
• Reverb > Delay (R — D)
The Delay — Reverb program provides both delay and
reverb, with delay before reverb.
The Reverb — Delay provides delay and reverb with
reverb before delay.
| ТУР L-DLY R-DLY
R>D 290.0 320.0
` {ТҮР RVT ВИХ LVL
RD 2.6 0 0
| ТУР FB L/R DMX
вэр 28 L=R 0
L-DLY (Left Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the left channel.
R-DLY (Right Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the right channel.
FB (Feedback: 0 — 100 %)
Determines the amount of effect-sound feedback returned
to the input of the processor. Higher values produce a a
greater number of repeats.
L/R (L/R Channel Delay Level Balance: 0 — 100 96)
Sets the left-to-right channel balance of the delay sound
level. Higher values produce higher-level delay sound from
the left channel, and smaller values produce a higher-level
delay sound from the right channel.
DMX (Delay Mixing Balance: 0 — 100 96)
Sets the balance between the direct and delay sound.
Higher values produce a greater proportion of delay sound
in. relation to direct sound.
RVT (Reverb Time: 0.3 — 40 s)
Sets the duration of the reverb effect.
RMX (Reverb Mixing Balance: 0 — 100 %)
Sets the balance between the direct and reverb sound.
Higher values produce a greater proportion of reverb
sound in relation to direct sound.
LVL (Output Level: -41 — «6 dB)
Determines the output level of the effect.
18