Maintenance Plan - Scheppach IGT3500 Original Bedienungsanleitung

15. Maintenance plan

Always comply with the following maintenance intervals in order to en-
sure problem-free operation.
ATTENTION! At initial start-up, engine oil and fuel must be filled.
Before
Checking
the engine
oil
Changing
the engine
oil
Checking
the air filter
Cleaning the
air filter
Visual
inspection of
the device
Cleaning the
spark plug
Check and
readjust the
throttle valve
Cleaning
the cylinder
head
Adjust the
valve play
Attention: Only have points "X*" carried out by an authorised specialist
company.
68 | GB
after operating
every for 20 hours
use
X
first time, then
every 50 hours
X
X
www.scheppach.com
after
operating for
50 hours
X
Change
filter insert if
necessary
X
Gap: 0.6 - 0.7
mm, replace if
necessary
after operating
for 300 hours
X*
X*
X*