Operation - Scheppach IGT3500 Original Bedienungsanleitung

10. Put the engine cover (3) on and fix in place by retightening the two
screws.
8.3 Refill with fuel
m Attention!
The power generator is delivered without petrol. It is therefore es-
sential to fill with petrol before commissioning. Use Super E10 pet-
rol for this.
1. Unscrew the tank filler cap (2) and fill a maximum of 6.3 l Super E10
petrol into the tank container using the funnel (17).
2. Ensure that the tank is not overfilled (observe the fill level marking
(26)!) and that no petrol is spilled. Use a fuel filter insert (25). Clean
up spilled petrol immediately and wait until the fuel vapours have
evaporated (wipe dry).
3. Close the tank cover (2).
m ATTENTION!
Refuel in a well-ventilated area with the engine stopped.
If the engine was in operation immediately before, allow it to cool
first. Never refuel the engine in a building where the petrol vapour
may come into contact with flames or sparks.
Petrol is highly inflammable and explosive. When handling fuels,
you may suffer burns or other severe injuries.

9. Operation

m Attention!
Always make sure the device is fully assembled before commis-
sioning!
9.1 Starting the engine (Fig. 5 + 6)
m Attention! Danger of poisoning!
Only use the device outdoors and never in closed or poorly ventilated
rooms.
www.scheppach.com
GB | 57