Carl Valentin ILX 56/8 Kurzanleitung Und Hinweise Zur Produktsicherheit Seite 130

ILX
Clean theTransfer Ribbon Drawing Roller
A soiled drawing roller can lead to reduced print quality and can affect transport of material.
•
Open the printhead (B) by turning the pressure lever (A) anticlockwise.
•
Remove labels and transfer ribbon from the print mechanics.
•
Remove deposits witht roller cleaner and a soft cloth.
•
If the roller appears damaged, replace it.
•
Reload labels and transfer ribbon.
•
To move the printhead (B) down, turn the pressure lever (A) in clockwise direction until it locks.
Clean the Pressure Roller
A soiled pressure roller can lead to reduced print quality and can affect transport of material.
CAUTION!
Wrong cleaning auxiliaries can damage the pressure roller!

Do not use sharp or hard objects to clean the pressure roller.
ILX 56/8, 80/8, 54/12, 81/12
D
C
•
Open the printhead (B) by turning the pressure lever (A) anticlockwise.
•
Remove labels and transfer ribbon from the print mechanics.
•
Remove deposits with the roller cleaner and a soft cloth.
•
Turn the roller (C + D) manually step by step to clean the complete roller (only possible when printing module is switched
off, as otherwise the step motor is full of power and the roller is kept in its position).
•
Reload labels and transfer ribbon.
•
To move the printhead (B) down, turn the pressure lever (A) in clockwise direction until it locks.
130
ILX 103/8, 104/8, 106/12, 106/24, 108/12
A
B
English
D
C
A
B