Carl Valentin ILX 56/8 Kurzanleitung Und Hinweise Zur Produktsicherheit Seite 114

ILX
Key:
External parameters
Key:
Buzzer
Display
Key:
Language
Key:
Keyboard layout
Key:
Customized entry
Key:
Hotstart
Key:
Autoload
Key:
Manual reprint
114
Label dimension only: The parameters for label length, gap length and label width can be
transferred to the printing system. All other parameter settings are to be made directly at the
printing system.
On: Sending parameters such as print speed and contrast via our layout creation software to
the printing system. Parameters which are set directly at the printing system before are no
longer considered.
Off: Only settings made directly at the printing system are considered.
On: An acoustic signal is audible when pressing a key.
Value range: 1 ... 7.
Off: No signal is audible.
Setting of display contrast.
Value range: 45 ... 75.
Selection of language in which you want to display the text in the display.
At the moment the following languages are available: German, English, French, Spanish,
Finnish, Czech, Portuguese, Dutch, Italian, Danish, Polish, Greek, Hungarian, Russian, Chinese
(option), Ukrainian, Turkish, Swedish, Norwegian, Estonian.
Selection of region for the desired keyboard layout. The following possibilities are available:
Germany, England, France, Greece, Spain, Sweden, US and Russia.
Off: No question appears at the display. In this case the stored default value is printed.
On: The question referring the customized variable appears once before the print start at the
display.
Auto: The questions referring the customized variable and the quantity query appear after every
printed layout.
Auto without quantity query: The question referring the customized variable appears after
every layout without additional query for the quantity.
On: Continue an interrupted print order after switching on the printing system anew.
Off: After switching off the printing system the complete data is lost.
On: A label which was loaded once from Compact Flash card can be loaded again
automatically after a restart of printer.
The last loaded label from CF card is always again loaded after a restart of printing system.
Off: After a restart of printing system the last used label must be again loaded manually from
the memory card.
A common use of the functions Autoload and Hotstart is not possible.
Yes: I In case an error occurred and the printing system is in stopped mode then you can reprint
the last printed labels by means of keys
No: Only blank labels were advanced.
English
and .