Carl Valentin ILX 56/8 Kurzanleitung Und Hinweise Zur Produktsicherheit Seite 118

ILX
Interface
Keys: , , ,
COM1 / Baud / P / D / S
Key:
Start sign / End sign
Key:
Data memory
Key:
Port test
Emulation
Keys: , , ,
Protocol
Key:
Printhead resolution
Key:
Drive mapping
118
, , , ,
COM1:
0 - serial interface Off
1 - serial interface On
2 - serial Interface On; no error message occurs in case of a transmission error.
Baud rate:
Indication of bits which are transferred per second.
Following values are possible: 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
P = Parity:
N - No parity
E - Even
O - Odd
Please observe that the settings correspond to those of the printing system.
D = Data bits
Setting of data bits.
Value range: 7 or 8 Bits.
S = Stop bits
Indication of stop bits between bytes.
Value range: 1 or 2 stop bits.
SOH: Start of data transfer block
ETB: End of data transfer block
Standard: After starting a print order the module buffer receives data as long as it is filled.
Advanced: During a current print order data is received and processed.
Off: After starting a print order no more data is received.
Check whether the data are transferred via the interface.
Press the and keys to select standard (on). Press the
any port (COM1, LPT, USB, TCP/IP) is printed.
, , , ,
CVPL: Carl Valentin Programming Language
®
ZPL: Zebra Programming Language
Press keys and to select the protocol. Press key
printing system is restarted and ZPL II
commands.
®
At activated ZPL II emulation the printhead resolution of the emulated printing system must be
set.
NOTICE!
If the printhead resolution of the Zebra
Valentin printing system, then the size of objects (e.g. texts, graphics) complies not
exactly.
®
The access to Zebra drives is rerouted to the corresponding Valentin drives.
NOTICE!
As the build-in fonts in Zebra
systems this can cause small differences in the text image.
Hex format 01
Hex formal 17
,
®
commands are transformed internally into CVPL
®
printing systems differs from that of the
®
printing systems are not available in Valentin printing
English
key and the data sent via
to confirm the selection. The