Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
Getting Started
•
Take the espresso machine out of the packaging carton and check that the
accessories are complete.
•
Clean all detachable parts.
•
Depending on the coffee preparation, clean the espresso machine 2-3 times
with clear water. Make sure that there is no coffee powder in the device when
cleaning the espresso machine.
Note: When using for the first time, there may be no water coming out of the
device. Turn the steam control anti-clockwise to fully open it and press the one-
cup button (3) or the two-cup button (8). When water comes out of the steam
vent, press the one-cup button (3) or two-cup button (8) to stop the water flow
and turn the steam knob clockwise to close it.
Filling the water tank
Take out the
water tank
1.
Take out the water tank on the right side of the device.
2.
Fill the tank with fresh, clean water, making sure not to exceed the MAX level.
Carefully place the water tank back into the espresso machine.
3.
The water tank can also be easily filled without removing it by pouring in the
water directly from a jug.
Note: It is normal for water to collect in the area under the water tank. This
area should therefore be regularly wiped dry with a clean sponge.
Fill
with water
EN
Insert
water tank
31
Werbung
