Parkside PLV 1500 B1 Originalbetriebsanleitung Seite 37

Trouble shooting
Problem
Abnormal noises,
clatter or vibra-
tions
Implement does
not start
Motor fails
Work result not
satisfactory
Possible cause
Foreign body on cylinder
16/17)
(
Damaged sprung tines
16) or cylinder knives
(
17)
(
16/17) incor-
Cylinder (
rectly mounted
Toothed-belt slip
No power
Starting lever (
tive
Carbon brushes worn out
Motor defective
Blocked by foreign body
Grass is too long
Clogged discharge
Overload protection tripped
Sprung tines of aerator cylin-
16) worn out
der (
Knives of verticutor cylinder
17) blunt or damaged
(
Toothed belt defective
Transport Position or incor-
rect Working Position se-
lected
Grass is too long
Remedy
Remove foreign body
Exchange cylinder
Install cylinder correctly (see "Ex-
changing the cylinder")
Switch device off and pull power
plug. Remove the soil and grass resi-
dues available.
Check power socket, cable, line; re-
pair only by qualifi ed electrician
2) defec-
Repair by After-Sales Service
Remove foreign body
Mow beforehand; see chapter "Op-
eration"
Clean discharge
Allow implement to cool down for
about 1 minute
Exchange cylinder (16/17)
Repair by After-Sales Service
see chapter "Setting the Working
Positions"
Mow beforehand; see chapter "Op-
eration"
GB IE
37