Parkside PLV 1500 B1 Originalbetriebsanleitung Seite 25

Caution! - Sharp tools.
Ensure that the hands and
feet are kept well away
from the cutting tools. The
cutting cylinder continues to
rotate briefl y after the motor
has been switched off.
Always disconnect the plug
from the mains prior to
maintenance work or if the
power cable is damaged.
Do not expose the device to
moisture. Never operate the
device in rain.
Attention! The rollers
continue to move.
Noise level ratings L
in dB(A).
Protection Class II
(Double insulation)
Electrically powered imple-
ments must not be disposed
of with the domestic waste
Transport and working
positions
General notes on safety
This implement can cause se-
rious injuries if it is not prop-
erly used. Please read these
WA
Switching
on/off
Operating Instructions care-
fully and familiarize yourself
with all the control elements
before operating this imple-
ment. Keep these Operating
Instructions in a readily ac-
cessible place so that this
information is always at your
disposal.
In the event of an accident
or malfunction during opera-
tion, switch off the device
immediately and pull out the
mains plug. Injuries must be
properly treated or medical
assistance sought. Read the
"Troubleshooting" section to
correct any malfunctions or
contact our Service Centre.
Operating the implement:
WARNING! The implement
can cause serious injuries.
How to a avoid accidents
and injuries:
Preparations:
• Read the instructions carefully.
Familiarise yourself with the
controls and how to use the ma-
chine correctly.
• Note that the user is responsible
for any accidents or risks to oth-
ers and their property.
• The implement is not suitable for
use by children.
• Children and persons with lim-
ited physical, sensory or men-
tal capabilities or inadequate
experience and knowledge, or
persons who are not familiar
with the instructions, should
GB IE
25