Parkside PLV 1500 B1 Originalbetriebsanleitung Seite 23

owner or operator is responsible for ac-
cidents or harm to people and their prop-
erty.
The manufacturer cannot be held liable for
damage caused by incorrect operation of
the implement or if it is not used in con-
formity with its intended purpose.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery
Carefully unpack the implement and check
that all the subsequently listed parts are
complete:
• Appliance housing with scarifying
drum and impact protection
• Aerator roller
• Upper handlebar
• Lower bar
• 2 central bars
• Collection bag with rods
• Mains cable strain relief
• 2 cable clamps
• Mounting accessories
• Wall bracket
• Instruction Manual
Functional description
The verticutor and lawn aerator has two
easily exchangeable work cylinders:
An aerator cylinder made of hard plastic
with vertically rotating sprung tines, and a
verticutor cylinder with vertically mounted
high-grade steel knives.
The implement features a high-quality plas-
tic case with collection bag and a handle
bar with a folding function. Please refer to
the subsequent descriptions for the actual
functions of the individual control elements.
Overview
1 Electronic switch lock
A
2 Start handle
3 Upper handlebar
4 Quick-release lever, screw and
washers for bar fastening
5 2 central bars
6 Lower bar
7 Quick-release lever and washers
for bar fastening
8 Appliance housing
9 Carrying handle
10 Depth adjustment lever
11 Machine cable terminal
12 Collection bag
13 Impact protection fl ap
15 Machine cable
16 Aerator roller with spring tines
17 Scarifying drum with blade
18 Power cable
19 Wing screw for roller fastening
E
20 Hexagon receptacle roller
21 Wall bracket
22 Screws, wall bracket
Technical data
Electric scarifi er/
Aerator ...................... PLV 1500 B1
Motor input .............................. 1500 W
Rated voltage ..................230 V~, 50 Hz
Protection Class ...
Degree of protection .........................IPX4
Rotating speed of the tool
) .......................... 3600 min
(n
o
Cylinder width ..............................36 cm
GB IE
II (Double insulation)
(r.p.m)
-1
23