Parkside PLV 1500 B1 Originalbetriebsanleitung Seite 33

• Mow the lawn to the required grass
height.
• Do not use the scarifi er in long grass. It
may otherwise wind around the scari-
fi er blade and result in damage to the
equipment.
• Select the appropriate working or
readjustment position (in the event of
cylinder wear) so that the implement is
not overloaded.
• Commence work in the vicinity of the
power socket and proceed away from
the socket.
• Always ensure that the extension cable
is behind you, and after turning move
it to the side that has already been
treated.
• Guide the implement at a walking
pace down lanes that are as straight
as possible. To ensure uninterrupted
aerating or verticuting the individual
lanes should always overlap by a few
centimetres. Dwelling too long at the
same place while the implement is run-
ning can damage the grass sward.
• To ensure that the extension cable is
not an impediment, turn the implement
in such a manner that the cable strain
release on the bar always faces the
side that has been treated.
• Always clean the implement after each
use (see "Cleaning/Maintenance").
• After having treated lawns with dense
moss growth, it is advisable to reseed
the lawn so that it can regenerate itself
quicker.
Transport
• Adjust the transport position (+10
mm) setting (see "Setting the Working
Position") when transporting the imple-
ment.
• Lift the implement to transport it over
steps and sensitive surfaces (e.g. tiles).
Use the handle (
Cleaning/maintenance
Work that has not been de-
scribed in these Instructions
must be carried out by a ser-
vicing agency authorised by
us. Only use original parts.
Wear gloves when handling the
cylinder.
Prior to all maintenance and clean-
ing work always switch off the im-
plement, disconnect the plug from
the power socket and wait until the
cylinder is standing still.
Warning! Risk of injury by danger-
ous moving parts!
General cleaning and
maintenance work
Do not jet water onto the
implement and do not clean
it under fl owing water. This
would result in the danger of
an electric shock and the im-
plement could be damaged.
• When work has fi nished remove plant
residues adhering to the wheels, inside
the ventilation opening, the grass ejec-
tor opening and the cylinder. Do not
use hard or pointed objects for this
purpose as they could damage the im-
plement.
• Completely empty the collection bag.
• Always keep the implement clean. Do
not use cleaning agents or solvents.
GB IE
9).
A
33