Parkside PWDS 920 B2 Bedienungs- Und Sicherheitshinweise Seite 86

Locking: Rotate the lock collar
clockwise.
Unlocking: Rotate the lock collar
clockwise.
NOTE
[ 27 ]
u
The hose stand
[ 28 ]
hose from excessive bending, when you
place the product on a floor in an upright
position.
˜ Changing the hose adaptor
(Fig. H, I)
NOTES
u
The hose adaptor
diameter of 47 mm is pre-installed on the
28 ] [
vacuum hose . This adaptor can be
directly connected to an industrial vacuum
cleaner without using its extraction hose.
u
Connecting the extraction hose of your
vacuum cleaner to the product: Attach the
[ 30 ]
hose adaptor
39 mm to the vacuum hose
Removing: Use the slotted screwdriver
to press down one of the locking clips on the
36 ] [
dual clip lock ring
When the locking clip is fully pressed down,
pull out the dual clip lock ring from the hose
[ 29 ]
adaptor . The sealing ring
completely separated.
84 GB/MT
[ 25 ]
counter-
25 ] [
protects the vacuum
[ 29 ]
with an outer
with an outer diameter of
28 ] [
.
32 ] [
.
35 ] [
must be
Attaching: Insert the sealing ring
30 ] [
the hose adaptor
Align the holes on the hose adaptor with the
locking clips on the dual clip lock ring
Press down one of the locking clips by hand.
Insert the dual clip lock ring into the hose
adaptor. Rotate the hose adaptor by 180°
and repeat the same steps on the opposite
side. Both locking clips must snap into the
holes on the hose adaptor.
˜ Selecting sanding paper
If you need to purchase additional sanding
paper, select sanding paper with following
characteristics:
– Diameter (Ø): 225 mm
– Hook-and-loop fastener on the back
– Pre-punched holes matching the position of
the holes on the sanding pad
– Made of aluminium oxide, silicon carbide
or other synthetic abrasives
The grit size is printed on the back of the
sanding paper. The smaller the number, the
coarser the grain.
Rough sanding: Use a sanding paper with
a small number.
Smooth finishing: Use a sanding paper
with a large number.
In order to obtain best results, start with a
coarse grain first. Complete the process with
the finest grain possible.
35 ] [
into
.
36 ] [
.
2 ] [