Parkside PWDS 920 B2 Bedienungs- Und Sicherheitshinweise Seite 77

Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 60745:
Sanding:
Vibration emission value a
Uncertainty K
NOTES
u
The specified hand-arm vibration value is
based on sanding with an abrasive sheet .
Different applications may result in different
values .
u
The noise and vibration values were
determined according to EN 60745-1 and
EN 60745-2-3 .
u
The specified vibration value was measured
an the basis of a standard test method and
can be used to compare any kind of power
tools .
u
The specified vibration value can also be
used for the initial evaluation of exposure .
m WARNING!
u
Depending on how you use the power tool,
the actual vibration values may deviate
from the specified values!
u
Take measures to protect yourself against
vibrations!
u
Make sure to take into account the entire
work process, i . e . also times when the
power tool is operated without load or
switched off! Appropriate measures include
the regular maintenance and care of the
power tool and its attachments, keeping
your hands warm, regular breaks and well
planned work processes!
: <2 .5 m/s
2
h
: 1 .5 m/s 2
m WARNING!
Wear hearing protection! The
effects of noise can cause a loss of
hearing .
Safety instructions
˜ General power tool safety
warnings
m
WARNING!
u Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury .
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool .
Work area safety
Keep work area clean and well
1)
lit. Cluttered or dark areas invite accidents .
2) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create sparks
which may ignite the dust or fumes .
GB/MT 75