Parkside PWDS 920 B2 Bedienungs- Und Sicherheitshinweise Seite 85

m IMPORTANT!
u
You must fully assemble the product before
using it for the first time!
m WARNING!
Always pull the power plug before
making adjustments to the product.
˜ Unfolding the shaft
(Fig. C)
Unlocking: Set the folding hinge lock
the position.
13 ] [
Hold the shaft and unfold the front
part until the folding hinge lock
engaged.
Locking: Set the folding hinge lock
the position.
˜ Attaching the telescopic
extension shaft
(Fig. D)
NOTE
u
The telescopic extension shaft
for rooms with high ceilings.
Unlocking: Fold up the lock lever
Insert the telescopic extension shaft
14 ] [
the connector (on the main handle
Adjust the length.
NOTE
u
u
u
[ 11 ]
to Locking: Fold down the lock lever
˜ Connecting the vacuum hose
11 ] [
is fully
(Fig. E, F, G)
m
11 ] [
to
NOTES
22 ] [
is suitable
u
[ 21 ]
.
[ 22 ]
into
[ 20 ]
) .
u
Insert the hose coupler
connector
The maximum length is indicated on the
telescopic extension shaft
Pulling the telescopic extension shaft out
[ 20 ]
: The Max marking
of the main handle
must remain hidden inside the main
handle or be aligned with the edge of the
14 ] [
connector .
Do not pull the telescopic extension shaft
out further.
WARNING!
Always wear a dust mask when
sanding. Using this product generates a
large amount of dust. Harmful dust may
be generated when sanding surfaces
coated with lead-based paint.
Attach an external dust extraction
unit (e.g. vacuum cleaner) to the hose
29 ] [ [ 30 ]
adaptor (at the end of the vacuum
28 ] [
hose ) . In this way, you protect yourself
as well as persons in the vicinity from dust
and you keep the workplace clean.
You may connect the vacuum hose
14 ] [
the connector on the main handle
24 ] [
to the connector on the rear handle
[ 26 ]
[ 14 ] 24 ] [
/ , until it is fully engaged.
[ 22 ]
.
21 ] [
.
28 ] [
to
20 ] [
or
[ 23 ]
.
into the
GB/MT 83