TR-Electronic 65 Serie Montageanleitung Seite 144

Parameterization and configuration
Valid catalogue entries for the PROFINET Rotative Measuring System:
1. C__65_-EPN
2. C__65_-EPN TR-Special
18 19
3. , C__65_-EPN + Cam
18
4. C__65_-EPN + SSI
Under these entries already the appropriate input module "encoder data 4 byte I" is entered and
cannot be changed.
Invalid inputs of parameter values are reported by the project engineering tool. The particular
limit values of the parameters are defined in the XML device description.
18
Optional, must be supported by the device, see name plate or order
19
Also valid for C__58_-EPN rotary encoders
 TR-Electronic GmbH 2007, All Rights Reserved
Page 100 of 131 TR-ECE-BA-DGB-0063 v15
Printed in the Federal Republic of Germany
04/25/2022