TR-Electronic 65 Serie Montageanleitung Seite 169

After installation of the device master file the device in the catalogue is at the following
place:
PROFINET
TR Rotative --> TR PROFINET Rotative
In the example, as PROFINET IO-Device a CEV65M was connected to the
PROFINET network. Under the category "Module" already the corresponding input
module "encoder data 4 byte I" is entered:
Figure 11: Configuration example with "C__65_-EPN"
Please recognize that the position data has the addresses 0..3, see figure above.
In the tab Properties --> Parameters of the Module "PNHaube001" on slot 0
the device parameters can be adjusted:
Figure 12: Parameter setting
Printed in the Federal Republic of Germany
04/25/2022
IO Additional
-->
TR-ECE-BA-DGB-0063 v15
Field Devices
-->
 TR-Electronic GmbH 2007, All Rights Reserved
Encoders
-->
Page 125 of 131