TR-Electronic 65 Serie Montageanleitung Seite 143

6.1 Overview
Configuration Operating parameters
C__65_-EPN
- Rotational direction
encoder
- Resolution
data 4 byte I
- Revolutions
Page 101
C__65_-EPN
- Rotational direction
TR-Special
- Measuring range
encoder
- revolutions numerator
data 4 byte I
- revolutions denominator
Page 103
- Rotational direction
- Measuring range
16 17 C__65_-
,
- revolutions numerator
EPN
+ Cam - revolutions denominator
- Output x, Cam x, Start
encoder
data 4 byte I
- Output x, Cam x, Start
Page 105
- Preset value 1
- Preset value 2
- Rotational direction
- Measuring range
- revolutions numerator
16 C__65_-EPN
- revolutions denominator
+ SSI
- Format SSI-interface
encoder
- Code SSI-interface
data 4 byte I
- Data bits SSI-interface
Page 108
- Mono time SSI-interface
- Preset value 1
- Preset value 2
*
from the bus master perspective
16
Optional, must be supported by the device, see name plate or order
17
Also valid for C__58_-EPN rotary encoders
Printed in the Federal Republic of Germany
04/25/2022
*
Length Features
- Preset adjustment with an acyclic write service
- Scaling of the measuring system
32 Bit IN
- Max. steps per revolution: 4096
- Max. number of revolutions: 8192
- Preset adjustment with an acyclic write service
- Scaling of the measuring system
- Scaling of the measuring system, the number of
steps per revolution can be a decimal number
32 Bit IN
and the number of revolutions any number (not
an exponent of 2).
- Max. steps per revolution: 262144
- Max. number of revolutions: 256000
- Preset adjustment with an acyclic write service
- Scaling of the measuring system
- Scaling of the measuring system, the number of
steps per revolution can be a decimal number
and the number of revolutions any number (not
an exponent of 2).
32 Bit IN
- Max. steps per revolution: 262144
- Max. number of revolutions: 256000
- Hardware inputs for Preset 1 and 2
- Cam output
- Preset adjustment with an acyclic write service
- Scaling of the measuring system
- Scaling of the measuring system, the number of
steps per revolution can be a decimal number
and the number of revolutions any number (not
an exponent of 2).
32 Bit IN
- Max. steps per revolution: 262144
- Max. number of revolutions: 256000
- Hardware inputs for Preset 1 and 2
- SSI output
TR-ECE-BA-DGB-0063 v15
 TR-Electronic GmbH 2007, All Rights Reserved
Page 99 of 131