Factory Defaults; General; Parameter Ranges And Default Settings - Schiller Argus VCM Gebrauchsanweisung

Factory Defaults

General

Parameter Ranges and Default Settings

General
is shipped with factory default settings. You may change the default settings to
ARGUS VCM
desired values as described in 'Using the Monitor' and 'Alarm and Limits' sections of this
manual. When you turn the monitor off properly with the change of the default setting, the
changed settings will be saved and they will be power-on default settings for next power-on.
If you want the power-on setting back to factory defaults, refer to page 32 'Using the
Monitor' section of this manual.
Parameter Ranges and Default Settings
Parameter
Systolic (mmHg)
Alarm Limits
Diastolic (mmHg)
Alarm Limits
MAP (mmHg)
Alarm Limits
PR (bpm)
Alarm Limits
SpO2 %
Alarm Limits
Patient Type
NIBP Units
NIBP Auto Interval
Temperature Units/Modes
Pulse Tone Volume
Alarm Volume
Night Panel
Print Control
Table 11. Parameter Ranges and Factory Defaults
Ranges
Neonatal Low: 25 to 115
Pediatric Low: 30 to 155
Adult Low: 30 to 255
Neonatal Low: 10 to 100
Pediatric Low: 15 to 125
Adult Low: 20 to 250
Neonatal Low: 10 to 105
Pediatric Low: 15 to 135
Adult Low: 20 to 250
Neonatal Low: 25 to 295
Pediatric Low: 25 to 295
Adult Low: 25 to 295
Neonatal Low: 50 to 98
Pediatric Low: 50 to 98
Adult Low: 50 to 98
Off, STAT, 1, 2, 3, 4, 5, 10, 15, 30, 45, 60, 90, 120,
ARGUS VCM
High: 30 to 120
High: 35 to 160
High: 35 to 260
High: 15 to 105
High: 20 to 130
High: 25 to 255
High: 15 to 110
High: 20 to 140
High: 25 to 255
High: 30 to 300
High: 30 to 300
High: 30 to 300
High: 52 to 100
High: 52 to 100
High: 52 to 100
Adult, Pediatric, Neonatal
mmHg, kPa
240
°C, °F, °C M, °F M
0 to 8
1 to 8
On, Off
Manual, Stream
Operator's Manual
Defaults
50, 100
75, 145
75, 220
30, 70
35, 100
35, 110
35, 80
50, 110
50, 120
100, 200
50, 150
50, 120
85, 98
90, 100
90, 100
Adult
mmHg
15
°F
4
4
Off
Manual
87