Figure 36. Pulse Rate High Alarm Limit Setting - Schiller Argus VCM Gebrauchsanweisung

Alarms and Limits
Pulse Rate Alarm Limits
Alarm Limits determine the high and low points of patient data at which the monitor
will sound an alarm.
With the monitor in the normal monitoring mode:
1. Press the Alarm button 7 times until Pulse rate high alarm limit is displayed.
2. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as needed
to change the limit to another value.
3. Press the Alarm button once again until Pulse rate low alarm limit is displayed.
4. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as needed
to change the limit to another value.
60
ARGUS VCM

Figure 36. Pulse Rate High Alarm Limit Setting

Figure 37. Pulse Rate Low Alarm Limit Setting
Operator's Manual
ARGUS VCM