Introduction; Features For Argus Vcm - Schiller Argus VCM Gebrauchsanweisung

Introduction

Features
Intended Use
About This Manual
WARNING: ARGUS VCM is intended only as an adjunct in patient assessment. It
must be used in conjunction with clinical signs and symptoms.
This manual contains information about
the following configuration:
Config. Features
N
Standard (NIBP + Pulse Rate)
NS
Standard + SpO2
NT
Standard + Temperature
NST
Standard + SpO2 + Temperature
All information in this manual, including the illustrations, is based on a monitor configured with
the Temperature, SpO2, and Printer options. If your monitor configuration lacks any of these
options, then some information in this manual does not apply.

Features for ARGUS VCM

Physical
ARGUS VCM
130×180×278 (mm) (H×D×W) and weighing 2.7 kg. Its carrying handle is designed for
instrument transport while battery-powered monitoring.
Electrical
ARGUS VCM
fully charged batteries (typical, performance is at 25 °C, with no printing and one NIBP
measurement every 15 minutes). The batteries are continuously recharged when AC power
(100-240 VAC, 50-60 Hz) is connected to the monitor. Details are described in the Battery
Operation section.
Display
ARGUS VCM
alphanumeric status conditions and error codes.
Auxiliary
Outputs
ARGUS VCM
Refer to the RS-232 Interface section for additional information.
ARGUS VCM
vital signs monitor is a lightweight and compact vital signs monitor measuring
is powered by an internal battery pack that provides 2 hours of monitoring from
has an FND display that shows numeric patient information as well as
monitor provides RS-232 I/O port for software upgrade or nurse call system.
vital signs monitor.
ARGUS VCM
Config. Features
NP
Standard + Printer
NSP
Standard + SpO2 + Printer
NTP
Standard + Temperature+ Printer
NSTP
Standard + SpO2 + Temperature + Printer
Operator's Manual
ARGUS VCM
monitor includes
5