Performing Power On And Self-Test (Post) - Schiller Argus VCM Gebrauchsanweisung

Using the Monitor

Performing Power On and Self-Test (POST)

CAUTION: ARGUS VCM automatically starts the Power-On-Self-Test, which tests the
monitor circuitry and functions. During POST (immediately after power-up), confirm
that all display segments and indicators are illuminated and the power on beep tone
sounds.
CAUTION: If any indicator or display element does not light, or the speaker does not
sound, do not use the monitor. Instead, contact qualified service personnel or Schiller
Technical Service Department.
1. Turn on the monitor by pressing the Power button for over 1 second.
2. The monitor automatically starts the Power On Self Test (POST), which tests monitor
circuitry and functions.
3. Ensure the monitor sounds the power-on beep tones, and all displays and indicators
are illuminated for 3 seconds.
4. If
ARGUS VCM
error code. Contact qualified service personnel or Schiller Technical Services
Department.
24
ARGUS VCM
Figure 7.
ARGUS VCM
detects an internal problem during POST, the monitor will display an
Operator's Manual
Power On Self Test
ARGUS VCM