Figure 30. Systolic High Alarm Limit Setting - Schiller Argus VCM Gebrauchsanweisung

ARGUS VCM
NIBP Alarm Limits
Alarm Limits determine the high and low points of patient data at which the monitor
will sound an alarm.
Systolic high and low alarm limits
With the monitor in the normal monitoring mode:
1. Press the Alarm button until Systolic high alarm limit is displayed.
2. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as needed
to change the limit to another value.
3. Press the Alarm button once again until Systolic low alarm limit is displayed.
4. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as needed
to change the limit to another value.

Figure 30. Systolic High Alarm Limit Setting

Figure 31. Systolic Low Alarm Limit Setting
ARGUS VCM
Alarms and Limits
Operator's Manual 57