Control Panel; Symbols On The Product; Type Plate - Husqvarna 2-48DS Bedienungsanweisung

Control panel

1 2 3
9
1. Emergency stop button
2. Warning lamp of motor protection/fault in power
supply
3. ON/OFF indicator for the control panel
4. Ammeter for the left blast motor
5. Hour meter
6. Ammeter for the right blast motor
7. Control lever for the abrasive material for the left
blast wheel
8. Control lever for the abrasive material for the right
blast wheel
9. ON/OFF button for the control panel
10. ON/OFF switch
11. ON/OFF button for the blast motors

Symbols on the product

Warning: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
High voltage.
Lifting point.
No lifting point.
4
4 5 6 7
10 11
8
Keep hands away from rotating parts.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use an approved respiratory protection.
Use approved hearing protection.
Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
This product is in compliance with
applicable EU directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.

Type plate

13
12
11
10
1. Product number
1 2 3 4
XX
2118 - 001 - 27.06.2023
5
6
7
8
XX
9