Husqvarna 2-48DS Bedienungsanweisung Seite 6

• Before you go away from the product, stop the
motors and disconnect the power cord. Make sure
that there is no risk of accidental start.
• Make sure that clothing, long hair and jewelry do not
get caught in moving parts
• Make sure that you are in a safe and stable position
during operation.
• Make sure that there are no loose bolts and nuts.
• Do not lift or tilt the product during operation.
Abrasive material comes out of the product at high
speed and can cause injury. Always disconnect the
power plug before you lift or tilt the product.
• Make sure that the separator and separator tray are
closed during operation.
• Do not operate the product unless you can get aid if
an accident occurs.
• Always use approved accessories. Speak to your
Husqvarna dealer for more information.
• If vibrations occur in the product or the noise level
from the product is unusually high, stop the product
immediately. Disconnect the power plug. Examine
the product for damages. Repair damages or let an
approved service agent do the repair.
• Always connect the product to a dust collector for
removal of the dust.
• Do not pull the hose of the dust collector. The
product can fall and cause injury or damage.
• Keep the dust collector on until the motors stop fully.
• Only operate the product from behind with your hand
on the handlebar.
• Make sure that there is no grease or oil on the
handles.
• Make sure that the brush list seals are installed in
the correct height.
• Make sure that the magnetic seals are installed in
the correct height.
• Always use approved abrasive material. Refer to
Approved abrasive material on page 28 . Speak to
your Husqvarna dealer for more information.
• Make sure that the motors have correct direction of
rotation. The correct direction of rotation is given with
an arrow on the motor fan covers.
Vibration safety
WARNING:
instructions that follow before you use the
product.
• During operation of the product, vibrations go from
the product to the operator. Regular and frequent
operation of the product can cause or increase the
degree of injuries to the operator. Injuries can occur
in fingers, hands, wrists, arms, shoulders, and/or
nerves and blood supply or other body parts. The
injuries can be debilitating and/or permanent, and
can increase gradually during weeks, months or
years. Possible injuries include damage to the blood
6
Read the warning
circulation system, the nervous system, joints, and
other body structures.
• Symptoms can occur during operation of the product
or at other times. If you have symptoms and
continue to operate the product, the symptoms can
increase or become permanent. If these or other
symptoms occur, get medical aid:
• Numbness, loss of feeling, tingling, pricking,
pain, burning, throbbing, stiffness, clumsiness,
loss of strength, changes in skin color or
condition.
• Symptoms can increase in cold temperatures. Use
warm clothing and keep your hands warm and dry
when you operate the product in cold environments.
• Do maintenance on and operate the product as
given in the operator's manual, to keep a correct
vibration level.
• The product has a vibration damping system that
decreases the vibrations from the handles to the
operator. Let the product do the work.
• Keep your hands on the handle or handles only.
Keep all other body parts away from the product.
• Stop the product immediately if strong vibrations
suddenly occurs. Do not continue the operation
before the cause of the increased vibrations is
removed.
Dust safety
WARNING:
instructions that follow before you use the
product.
• Operation of the product can cause dust in the
air. Dust can cause serious injury and permanent
health problems. Silica dust is regulated as harmful
by several authorities. These are examples of such
health problems:
• The fatal lung diseases chronic bronchitis,
silicosis and pulmonary fibrosis
• Cancer
• Birth defects
• Skin inflammation
• Use correct equipment to decrease the quantity of
dust and fumes in the air and to decrease dust on
work equipment, surfaces, clothing and body parts.
Example of controls are dust collection systems.
Decrease dust at the source where possible. Make
sure that the equipment is correctly installed and
used and that regular maintenance is done.
• Use approved respiratory protection. Make sure
that the respiratory protection is applicable for the
dangerous materials in the work area.
• Make sure that the airflow is sufficient in the work
area.
Read the warning
2118 - 001 - 27.06.2023