Bluetooth Operation; Accepting/Rejecting An Incoming Phone Call - Renkforce RF-RUDAB1805 Bedienungsanleitung

f) Bluetooth Operation
®
To permit best phone reception and keep electromagnetic irradiation in the vehicle as low as possible,
always use an outside aerial in mobile phone operation.
In Bluetooth
playback device for Bluetooth
or Bluetooth
is called "pairing".
Pairing
• Switch on the car radio.
• Switch your mobile phone on and activate the Bluetooth
• Activate the scan for other Bluetooth
• When the car radio was found, your Bluetooth
• Connect your mobile phone to the car radio.
• Enter the password 0000 if necessary to couple the two devices.
• After successful pairing, the display indicates the Bluetooth
• If pairing was not successful, try repeating the process. The car radio may have to be deleted in your mobile phone
first (see mobile phone instructions).
Only one Bluetooth
connection already, this connections must be interrupted first. This is done via the menu of your mobile
phone.
If the car radio or mobile phone with which there is an active connection is switched off or removed from
the range, the connection is interrupted. The Bluetooth
on again or when the mobile phone returns into the car radio range again, the connection is automatically
re-established. The display (4) now shows the Bluetooth
To permit this automatic establishment of connection, this function may have to be activated at the mobile
phone (read about this in your mobile phone's instructions).

Accepting/rejecting an incoming phone call

• For an inbound phone call, the display (4) shows CALL IN and the number of the caller.
If the caller suppresses his caller ID or the mobile phone network does not support this feature, the caller
ID cannot be displayed.
• Press the button MOD/TA/
• Press the button F/PS/
You can change the talking volume with the dial (9) during a phone call.
operation, the car radio can be used as hands-free system for mobile phones and/or as
®
A2DP audio streaming. Before transmission between your mobile phone
®
device and the car radio is possible, however, both devices must be coupled. This process
®
devices in the reception area at your mobile phone.
®
device at a time can be coupled with the car radio. If there is an active Bluetooth
®
(3) to accept an incoming phone call.
(2) to reject an incoming phone call.
mode here (see instructions of the mobile phone for this).
®
device shows the Bluetooth
®
symbol permanently.
®
symbol in the display (4) flashes. When switching
®
symbol permanently again.
®
name of the car radio (BT Car Stereo).
®
®
53