Reset Function; Menu Settings - Renkforce RF-RUDAB1805 Bedienungsanleitung

MOD/TA/ (3) button
• This button selects the different audio sources, activates traffic announcements and operates the hands-free device
(for more on traffic announcements or Bluetooth
• Briefly push the button
FM > DAB > BT AUDIO > USB > SD > AUX-IN
When one of the sources is not active, i.e. no medium inserted, this source will be skipped in the selection.
Manual setting of the time
• Keep the rotary control (9) pushed until the time is displayed.
• Push and hold the rotary control (9) again until the hours display flashes.
• Set the hours by turning the rotary control (9).
• Briefly push the rotary control (9) and adjust the minutes by turning the rotary control (9).
• Push and hold the rotary control (9) until the display stops flashing to save the setting.
Once the device receives an RDS station or a DAB station, the time will be set automatically. The time does
not need to be set manually then.
Button (5)
• Press this button to unlatch the control panel.

RESET function

• This function resets all settings to factory settings.
• Push the button RESET (19) with a pointy object (e.g. a straightened paper clip) in the following cases:
- when you have completed the installation and connection
- when the device does not react to the operation of buttons any more
- when the display shows undefined characters
b) Menu Settings
To select the menu settings, push the dial switch (9) briefly or for a longer time to call the two levels of the menu.
The first level serves to set more frequently used functions, while the second level only contains functions that are
needed less often.
Choose the options for the respective settings by turning the rotary control.
Depending on the source (radio unit, USB playback etc.) that is currently active, only some functions may
be available.
44
MOD/TA/
(3) to switch to the next source:
operation, see below in these instructions).
®