Renkforce RF-RUDAB1805 Bedienungsanleitung Seite 46

Menu items - Push the rotary control (9) longer
Time setting > AF ON/OFF > TA SEEK/ALARM > PI MUTE/SOUND > RETUNE S/L > MASK DPI/ALL
• Time setting (see "General Operation")
• AF ON/OFF
AF ON > automatic station tracking on
AF OFF > automatic station tracking off
The AF function activates automatic station tracking (see "RDS as reception concept").
"AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the radio does not
receive an RDS station at all, the display flashes. When a station can be received well, the symbol is
displayed continuously.
When you leave a transmission area, the radio can only switch to a better station when the AF function is
activated.
• TA SEEK/ALARM
TA SEEK >> When the radio has lost the traffic information, it will seek a new station with Traffic Announcement
coding.
TA ALARM >> When the radio cannot receive the TA code any more, there will be an alarm signal.
• PI SOUND/MUTE
Device reaction when a transmission area is reached where two different stations with different programme
identification (PI) are transmitting the same AF (alternative frequency):
PI SOUND >> The device switches to the new station for a few seconds and then back.
PI MUTE >> The new station is muted.
• RETUNE S/L
Reaction of the device when the traffic announcement ID is lost:
RETUNE S >> When the radio does not receive traffic announcements any more, the auto-scan starts 30 seconds
later.
RETUNE L >> When the radio does not receive traffic announcements any more, the auto-scan starts 90 seconds
later.
• MASK DPI/ALL
Device reaction during station search:
MASK DPI >> Alternative frequencies with different programme information (PI) are not considered.
MASK ALL >> Alternative frequencies with different programme information (PI) and alternative frequencies with a
high signal strength but without RDS information are not considered.
46