Dab Radio Operation - Renkforce RF-RUDAB1805 Bedienungsanleitung

c) DAB Radio Operation
Station scan
• If you cannot receive any DAB station after selecting DAB mode, push the button F/PS/
• The device will then perform a station scan in the DAB reception range and saves the stations found in the station
list.
• During the search, the display (4) shows the number of stations found.
Station selection
• Push the buttons
• The chosen station will be played back after a brief time.
Station buttons
• Set the station to be saved.
• Push the station button (11-16) on which you want to save the station.
• The display (4) shows SAVE Px (x designates the corresponding station button).
• If you briefly push the station buttons, you can select a station you have pre-set.
The DAB area has six station buttons. Therefore you can assign 6 station buttons.
Traffic announcements
• Keep the button MOD/TA/
• When the TA function is active, TA appears in the display.
• If a different audio source is being played back (USB playback for instance), the programme is set to mute during
the traffic announcement.
• When you listen to a radio programme at a very low volume, the volume is automatically increased to a pre-set
value.
Calling station information
• Briefly push the BND/PTY button (10) to display various types of information on the station you just listened to.
• Push the BND/PTY button (10) once more to move to the next display.
• The contents of the displayed information depend on the station.
(1) and (8) repeatedly until the desired station is shown in the display (4).
(3) pushed to switch the TA function on or off.
(2).
47