Renkforce RF-RUDAB1805 Bedienungsanleitung Seite 45

Menu items - Push the rotary control (9) briefly
BAS > TRE > BAL > FAD > LOUD > EQ > STEREO/MONO > LOC > BEEP
• BAS controls the low frequency range
• TRE controls the high frequency range
• BAL controls the volume ratio between the right and left speakers
• FAD controls the volume ratio between the front and rear speakers
• LOUD ON/OFF
LOUD ON >> The loudness function is active.
LOUD OFF >> The loudness function is inactive. The sound is not influenced.
At low volumes the human ear does not perceive very low and very high sounds well. An increase of the
frequency range for low volume (loudness correction) counteracts this effect and the music replay sounds
more natural.
• EQ - EQUALIZER
EQ OFF >> Equaliser off
CLASS >> Pre-setting for classical music
POP >> Pre-setting for pop music
ROCK >> Pre-setting for rock music
FLAT >> Equaliser on, linear frequency response
• STEREO/MONO
STEREO >> Radio reception is in stereo.
MONO >> Radio reception is in mono.
At bad FM reception, it may be of benefit to switch radio reception to mono. Radio operation will be less
subject to interference in mono mode.
• LOC ON/OFF
LOC ON >> Only stations with a very good field strength will be received.
LOC OFF >> All stations will be received.
In areas with a great many transmission stations and good radio reception, it may be sensible to set the
option LOC ON. This will skip weak stations that could only be received with interferences in the automatic
station scan.
• BEEP ON/OFF
ON >> A confirmation sound sounds when a button is pushed.
OFF >> No confirmation sound sounds when a button is pushed.
45