Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g) LED warning settings
You can set whether or not to receive an acoustic warning in addition to visual messages. To
switch on/off, proceed as follows:
•
Select the menu item
firm your selection with the confirmation button (4) to switch to the LED messages/war-
nings settings menu.
•
Press the up button
on or off.
•
Confirm your selection with the confirmation button
to cancel the entire setting.
h) Resetting to factory settings
•
Select the reset symbol
button
(6) Confirm your selection with the confirmation button
reset menu.
•
In the reset menu, select the menu item for switching the reset on or off with the up button
(7) and down button
or press the Clear button
i) Setting continuous measurement
•
Select the continuous measurement symbol
(7) and down button
switch to the continuous measurement menu.
j) Deleting saved data
•
Select the delete symbol
button
(6) Confirm your selection with the confirmation button
delete menu.
•
In the menu, select the data that you wish to delete with the up button
button
(6). Confirm deletion with the confirmation button (4) or press the Clear button
(5) to leave the menu without deleting.
•
Deleting deletes the data stored on the device.
46
by pressing the up button
(7) and the down button
on the LC display by pressing the up button
(6). Confirm your selection with the confirmation button (4)
(5) to leave the menu without resetting.
(6) Confirm your selection with the confirmation button (4) to
on the LC display by pressing the up button
(7) and down button
(6) to switch the visual/LED messages
(4) or press the Clear button
on the LC display by pressing the up button
(6). Con-
(5)
(7) and down
(4) to switch to the
(7) and down
(4) to switch to the
(7) and down
Werbung
Inhaltsverzeichnis
