Technical Data - VOLTCRAFT SDM-2125 Bedienungsanleitung

17. Technical data

Power supply .................................. 2x 1.5 V AA batteries
Battery life ....................................... Approx. 6 to 8 hours per day
Measurement range ....................... 0 - 1250 µm
Measurement range ....................... 0 - 49.2 mil
Automatic shut-off ........................... After approx. 5 minutes without measurement or press of a
Low battery indicator ......................At 2.2 V ±0.2 V.
Automatic rotation angle .................0°, 90°, 180°, 270°
Units of measurement ....................µm/mil (switchable)
Refresh interval ..............................0.5 seconds
Drop height .....................................Up to 1 metre
Convex radius .................................Min. curvature 5 mm
Concave radius ...............................Min. curvature 50 mm
Measured surface diameter ............min. 20 mm
Minimum thickness of
carrier material ................................0.5 mm
Data storage ...................................500 groups
LC display .......................................48 mm x 36 mm
Supported operating systems ......... Windows
Operating conditions ....................... 0 to +60 °C, <80 % relative humidity (non-condensing)
Storage conditions .......................... - 20 to +60 °C,
Dimensions (W x H x D) .................35 x 152 x 65 mm
Weight ............................................ 180 g (with battery)
52
(included)
(Accuracy ±3 % H+1)
(Accuracy ±3 % H+0.04)
button
Vista™, RT,
®
(32/64 bit), 7 (32/64 bit),
8 (32/64 bit), 8.1 (32/64 bit),
10 (32/64 bit) (for software)
<75 % relative humidity (non-condensing)
130 g (without battery)