Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9 Battery
9.1 Insert batteries
1. Remove the battery compartment cover by releasing the locking screw. Be care-
ful not to lose the screw.
2. Insert 4x AA batteries matching the polarities shown.
3. Replace the compartment cover.
9.2 Battery voltage check
Important:
– Replace the batteries before they are completely spent.
– Power shut off due to low batteries will result in data loss.
1. Press the
- Normal range is: 4.8 to 6.0 V.
- The replace battery symbol will show if the voltage is: < 4.8 V.
2. Press
to exit battery voltage check.
10 System settings
Configure various settings through the setup menu before using the device.
1. Press
and then ▲/ ▼to select a setting.
2. Press
to confirm the selection or press
- Press ▲/ ▼to adjust values.
- Press
3. Press
to save the setting and return to the main menu.
button to display the battery voltage.
to toggle through settings.
to exit the setup menu.
25
Werbung
Inhaltsverzeichnis
