Selecting The Location; Leveling The Balance - OHAUS Scout Serie Bedienungsanleitung

EN-2
2.1.1 Releasing the transportation Lock
Release the red Transportation Lock on
subplatform of the balance by turning the
red pointer 90 counter-clockwise.
2.1.2 Installing the Weighing Pan
Balances with a rectangular pan are placed into the sub-platform as shown and rotated
counter-clockwise until it locks. Round pans are placed straight down on sub-platform.
2.1.3 Security Slot
A security slot is provided at the rear of the balance allowing the balance to be secured by an
optional cable and lock accessory.

2.2 Selecting the Location

For best performance, the Scout SPX balance should be used in a clean, stable environment.
Do not use the balance in environments with excessive drafts, with rapid temperature changes,
near magnetic fields or near equipment that generates magnetic fields, or vibrations.

2.3 Leveling the Balance

The Scout has an illuminated level indicator as a reminder that the balance should be leveled
for accurate weighing. There is a level bubble in a small round window on the front of the
balance. To level the balance, adjust the feet at each corner until the bubble is centered in the
circle. Be sure the equipment is level each time its location is changed.
Find Quality Products Online at:
Subplatform
Figure 2-1. Transportation Lock
Figure 2-2. Pan Installation
Figure 2-3. Level indicator
GlobalTestSupply
www.
TM
SCOUT SERIES BALANCES - SPX
Transportation
Lock Pointer
Locked
Position
Unlocked
Position
.com
sales@GlobalTestSupply.com