Selecting The Location; Leveling The Balance; Connecting Power - OHAUS Scout SJX Serie Bedienungsanleitung

TM
SCOUT SJX SERIES BALANCES
2.1.4 Security Slot
A security slot is provided at the rear of the balance allowing the balance to be secured by an
optional cable and lock accessory.

2.2 Selecting the Location

For best performance, the Scout balance should be used in a clean, stable environment. Do not
use the balance in environments with excessive drafts, with rapid temperature changes, near
magnetic fields or near equipment that generates magnetic fields, or vibrations.
2.3

Leveling the Balance

The Scout has an illuminated level indicator as a reminder that the balance should be leveled
for accurate weighing. There is a level bubble in a small round window on the front of the
Balance. To level the balance, adjust the feet at each corner until the bubble is centered in the
circle. Be sure the equipment is level each time its location is changed.

2.4 Connecting Power

AC Adapter Installation
AC power is used to power the scale when battery power is not needed. First, connect the AC
Adapter (supplied) to the AC Adapter Input Jack at the rear of the balance then connect the AC
plug to an electrical outlet.
Interface Connection
Battery Installation
Install the four "AA" batteries with polarity as shown in the battery compartment.
Note:
After power on, it is recommended to let the balance warm for at least 5 minutes before using it.
1.800.561.8187
Figure 2-4. Level indicator
AC Adapter Input Jack
Security slot (Anti-theft lock slot)
Figure 2-5. Rear and bottom view of balance
www.
Weigh Below Hole
Security Switch
Battery Compartment Cover
information@itm.com
.com
EN-3