Querying System Information - Hettich EBA 280 Bedienungsanleitung

EN
20.1

Querying system information

The following system information can be queried:

Centrifuge model

The maximum speeds of the various rotor codes,

Centrifuge program version

Frequency converter type

Frequency converter program version
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
seconds.

 Press the key.

 Press the key.
START
Centrifuge model.
PULSE

 Press the key.
R : Rotor code of the rotor.
: The rotor code of the currently used
rotor is marked with an asterisk.
RPMmax : The maximum speed of the
rotor permitted for this centrifuge.

 The maximum speeds of the various rotor
codes can be displayed with the keys.

 Press the key.
Centrifuge program version.

 Press the key.
Frequency converter type.

 Press the key.
Frequency converter program version.

 Press the key twice to exit the "
STOP
menu or press three times to exit the "
OPEN
MACHINE MENU ".
68/165
STOP
key.
OPEN
PROG RPM
PROG RPM
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Info"
PROG RPM
t/min:s
t/min:s
t/min:s PROG RPM
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
Example:
t/min:s PROG RPM
t/min:s
t/min:s