Inhaltsverzeichnis; Machine Data; Safety Instructions - Ferm BLM1005 Gebrauchsanweisung

Annex 4 - Parts list bed/headstock
No. Part
1 Bed
2 Motor base plate
3 Motor
4 Motor pulley
5 Guard
6 Mounting plate
7 Headstock with cover
8 Mains spindle
9 Bearing cover
10 Main spindle pulley
11 Idler
12 Tension pulley
13 Bolts with ring
14 Chuck headstock
15 Oil cup
16 Switch
17 Longitudinal and traerse motion bearing
18 Longitudinal traverse (lathe spindle
19 Bearing housing drive shaft
20 Drive shaft longitudinal and transverse motion
21 Bush
22 Castle locking nuts
23 Axial thrust bearing
24 Gear rack
100
BENCH LATHE MACHINE
The numbers in the following text correspond with the pictures at page 2 - 4.
Carefully read this manual before using the machine. Make sure that you know how the machine functions and how to operate it.
Maintain the machine in accordance with the instructions to make sure it functions properly. Keep this manual and the enclosed
documentation with the machine.
Use
The metal lathe has been designed for processing, mechanically removing metal, of ferrous and non-ferrous metals, synthetics and wood.
The metal lathe is meant for semi-professional use and for leisure interests.
Contents
1. Machine data
2. Safety instructions
3. Installation
4. Before operation
5. Operation
6. Maintenance

1. MACHINE DATA

Technical specifications
Mains voltage
Mains frequency
Absorbed power
Center height
Center distance
Max. turndiameter above bed
Max. turndiameter above support
Culvert and recording main shaft
Number of speeds main shaft
No load speeds main shaft
Automatic start
Thread cutting (right)
Distance toolholder centerline measured vertically
Rotating plate movement
Graduation rotating plate
Movement tool cut
Movement cross slide
Movement end slide
Graduation slide screws
Recording and stroke slide tube
Graduation slide tube
Weight
Sound pressure Lwa
Vibration value
The machine is delivered in the following base performance
Machinebed with prism conductor, ferme head with main shaft and drive for automatic longitudinal feed and thread cutting, tail stock with
sliding tube and transverse adjustment, electro motor with start/stop- and sense of rotation switch, support with lock case, combined with
starting/lead screw, cross slide with rotating plate and tool slide, fourfold tool holder with index pin, 3-chuck with extra exterior basins and
measuring certificate, drive protection case, 7 change wheels, 3 driving-belts, 2 centers, 3 open-end spanners, 2 socket head wrenches,
catch pin and a tightening-wrench chuck.
Excluded under-carriage (Art.No. BLA1009).

2. SAFETY INSTRUCTIONS

Explanation of symbols
The following symbols are used in these instructions for use:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
4
Ferm Ferm
GB
D
NL
F
E
P
I
RUS
GR
230 Volt
50 Hz
370 Watt
110 mm
500 mm
200 mm
115 mm
18 mm, MT-3
6
120 - 2000/min
11 mm, 0.04 - 0,3
11 mm, M0.4 - M3
15 mm
360º
± 45º
70 mm
115 mm
500 mm
0.04 mm
MT-2, 50 mm
0.05 mm
115 kg
70.0 dB(A)
2.8 m/s 2
05