Gear Rack; Motor; Switch; Accessory List - Ferm BLM1005 Gebrauchsanweisung

Fig.1
Fig.3
Fig.5
Fig.7
02
5.12
5.13
5.14
5.15
5.16
5.17
5.18
5.19
-
-
-
-
-
-
Fig.2
-
-
-
The reference numbers refer to the 5 annexes indicated with the numbers 0, 1, 2, 3, 4, 5. The number in front of the point refers to the Annex, the
number behind the point refers to the part. So, reference 4.07 refers to Annex 4, part 7.
Accessory
Lower case
3-Jaw chuck
4-Jaw chuck
Steady rest
Follow rest
Face plate
Fig.4
Accessories-set
Center
Center
Inside basin 3-jaw
Outside basin 3-jaw
V-belt tension

Gear rack

Gear rack
Inch gear wheel set
Change wheel scissors
Handwheel

Motor

V- belt
V- belt
V- belt

Switch

Fig.6 Transmission/lock nut *)
Slide spindles, slide nuts *)
Ball- and roller bearings *)
Revolving center
Drill chuck 13 mm
Drill chuck 16 mm
Adaptor B-18/MT-2
Chisels 10 x 10 mm
Chisels 12 x 12 mm
Chisels 16 x 16 mm
Taper shank drills
Taper shank drills
Morse taper
Morse taper
Morse taper
Fig.8
*) These part are not always in stock. Ask your local Ferm-dealer.
Ferm Ferm
Change wheel 42
Change wheel 49
Change wheel 28
Change wheel 63
Change wheel 70
Change wheel 84
Change wheel 98
Change wheel 105
Center MC-3
Center MC-2
3-Jaw chuck
4-Jaw chuck
V-belt tension roller
Micro switch for door
V-Belt Z31 (10 x 790)
V-Belt Z28 (10 x 710)
V-Belt Z35 (10 x 890)

Accessory list

No. Function
330957 With store possibilitiesand cutting tray
330955 Clamping pieces of work which are round
330956 Clamping pieces of work which are not round
330962 Turning long pieces of work
330965 Turning long and thin pieces of work
330968 Fixing pieces which are not round
400375 As delivered with machine
400368 MT-3
400369 MT-2
400377 Set
400376 Set
400374 Complete
400346 Steel
400366 Synthetic
330961 Thread cutting
40031 Steel
400404 Synthetic for longitudinal adjustment
400336 Complete
800170 10 x 710 mm
800114 10 x 790 mm
800197 10 x 890 mm
400343 Complete unit with relay
330557 MT-2
330240 Self-stretching, J2 connection
330250 Self-stretching B-18 connection
330297 For drill chuck 16 mm
331466 5 parts HM, lenght 160 mm
331464 5 parts HM, 180 mm
331465 5 parts HM, 180 mm
332407 9 parts: MT-2: 14.5, 16, 18, 20 and 22 mm.
MT-3: 24, 26, 28, 30 mm.
332409 10 parts: MT-2: 14.5, 15, 16, 17, 18, 19, 20, 21, 22 and 23 mm
330180 From MT-4 to MT-3
330185 From MT-3 to MT-2
330190 From MT-4 to MT-2
400358
400359
400360
400361
400362
400363
400364
400365
400368
400369
400370
400371
400372
400373
800114
800170
800197
103