Replacement Parts; Ordering Replacement Parts - Behncke Europa 1002 Betriebsanleitung

Filter tank stainless steel / Replacement parts
Assessment
Output pressure display too
high, or display does not fall
back to output pressure after
backwashing
Water is cloudy
Water loss via the filter

10 Replacement parts

Purchase replacement parts from an authorised dealer or a specialised swimming pool shop.

10.1 Ordering replacement parts

When ordering replacement parts, be sure to give the following information:
28
Has the filter been backwashed correctly?
Is the manometer in order?
Has the filter material been hardened?
Are the chlorine and pH value in order?
Is the filter system the correct size?
Is the circulation time sufficient?
Has the filter been backwashed correctly?
Is the supply pipe to the swimming pool leakproof?
Is the backwash valve in order?
Is the drain plug leakproof?
CAUTION
Risk of injury due to incorrect replacement parts!
Incorrect or faulty replacement parts may lead to damage, malfunctions or
total failure, and may impair safety.
Only use original parts from the manufacturer
System type
Factory no.
Pump type
Valve size
Year of construction (see type plate – filter)
NOTE
You cannot order replacement parts without the above information.
Investigate the possible causes
(see type plate – filter)
(see type plate – filter)
(see type plate – pump)