Transport And Storage; Safety Instructions For Transport; Transport Inspection; Transporting / Storing - Behncke Europa 1002 Betriebsanleitung

3

Transport and storage

3.1 Safety instructions for transport

Unauthorised transport:

3.2 Transport inspection

Upon receipt, immediately check if the order is complete and check for any transport damage.
What to do if you identify external transport damage:
• Do not accept the delivery, or only accept it under reservation.
• Make a note of the extent of the damage on the transport documents or on the shipping company's
delivery note.
• Initiate a complaint.

3.3 Transporting / storing

The connections to the power and water mains must be disconnected by an expert before transport.
The filter system is mounted on the mounting plate or supplied as a loose system component.
NOTE
Damage due to be transported improperly!
A significant degree of material damage can be caused if transported improperly.
• Proceed carefully when unloading packages, during delivery and internal
transport, and observe the symbols on the packaging.
• Only use the intended anchor points.
• Only remove the packaging shortly before assembly
NOTE
Pick up the pre-assembled filter system by the mounting plate only and
transport it to the desired storage or installation location.
Secure the individually delivered system components against transport
damage. Only store the filter system in sheltered, frost-proof spaces with
a non-aggressive atmosphere.
Filter tank stainless steel / Transport and storage
9