11. PNEUMATIC CONNECTION
11.1. Connecting to the compressed air outlet
Route the pressure hose from the compressed air outlet (1) to the connected equipment.
A G3/8" connection is installed.
Route the pressure hose through the opening in the rear wall of the cabinet for cabinet-
mounted compressors.
DK50 2V/50
Fig. 8: Connecting to the compressed air outlet
11.2. Connecting the cabinet pressure gauge to the compressor
Remove the plug (1) from the threads (2) on the pneumatic block of the compressor.
Connect the cabinet pressure gauge hose to the threaded fitting.
DK50 2V/50
Fig. 9: Connecting the cabinet pressure gauge to the compressor
NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022
DK50 2x2V/110
DK50 2x2V/110
34
INSTALLATION
03/2022