Pneumatic Connection - EKOM DK50 4VR/50/M Benutzerhandbuch

12. PNEUMATIC CONNECTION

12.1. Connecting to the compressed air outlet
 Route the pressure hose from the compressed air outlet (1) to the connected equipment.
 A G 3/8" (DK50 4VR/50), G1/2" (DK50 2x4VR/110) connection is installed.
 Route the pressure hose through the opening in the rear wall of the cabinet for cabinet-
mounted compressors.
DK50 4VR/50
12.2. Connecting the cabinet pressure gauge to the compressor
 Remove the plug (1) from the threads (2) on the pneumatic block of the compressor
 Connect the cabinet pressure gauge hose to the threaded fitting
DK50 4VR/50
NP-DK50 4VR 50, DK50 2x4VR 110-AD-1_03-2022
Fig. 8: Connecting to the compressed air outlet
Fig. 9: Connecting the cabinet pressure gauge to the compressor
36
INSTALLATION
DK50 2x4VR/110
DK50 2x4VR/110
03/2022