Lifting And Transporting The Machine; Practical Guide For The Operator; Controls - Description - Tennant CS16 Bedienungsanleitung

Lifting and transporting the machine

All the steps described below must be carried out in an area with adequate lighting, and adopting the
The operator must always use personal protective equipment.
To load the machine onto a vehicle or transporter, proceed as follows:
Empty the dirty water and detergent tanks;
Place the packaging on the pallet base.
Position the machine in the packaging, lifting it by the handle, which must be folded forwards in the
stable and horizontal throughout the lifting operation.
Secure the pack to the pallet with plastic straps;
Lift the palletized machine using a fork lift truck and load it onto the vehicle or transporter;
Anchor the machine to the vehicle or transporter with wire ropes connected to the pallet and to the
machine itself.

PRACTICAL GUIDE FOR THE OPERATOR

Controls - Description

Battery charge indicator (
the battery charge level. Possible charge level indications: the battery charge level. Possible charge level indications:
Red and green Leds alight, yellow Led blinking: battery voltage > 30.0 V; Red and green Leds alight, yellow Led blinking: battery voltage > 30.0 V;
Red, yellow and green Leds alight: battery voltage 30.0 ... 24.8 V; Red, yellow and green Leds alight: battery voltage 30.0 ... 24.8 V;
Red and yellow Leds alight: battery voltage 24.8 ... 24.2 V; Red and yellow Leds alight: battery voltage 24.8 ... 24.2 V;
Red Led alight: battery voltage 24.2 ... 23.5 V; Red Led alight: battery voltage 24.2 ... 23.5 V;
Red Led blinking: battery voltage 23.5 ... 22.5 V, battery completely run down; after a few seconds Red Led blinking: battery voltage 23.5 ... 22.5 V, battery completely run down; after a few seconds
the brush and suction functions will be locked out; the brush and suction functions will be locked out;
4 seconds). 4 seconds).
function. The brush comes into operation only when the "Brush control lever" is shifted. ECO function. function. The brush comes into operation only when the "Brush control lever" is shifted. ECO function.
This reduces the power of the brush motor by 20%. To activate the ECO function, operate the "Brush This reduces the power of the brush motor by 20%. To activate the ECO function, operate the "Brush
control lever" then press the button and hold for a few seconds, until the Led starts blinking. control lever" then press the button and hold for a few seconds, until the Led starts blinking.
When the brush button is pressed, suction and detergent delivery are also enabled automatically.
indicator lights up when power is supplied to the suction motor. ECO function. This reduces the power indicator lights up when power is supplied to the suction motor. ECO function. This reduces the power
of the suction motor by 20%. To activate the ECO function, operate the "Brush control lever" then press of the suction motor by 20%. To activate the ECO function, operate the "Brush control lever" then press
the button and hold for a few seconds, until the Led starts blinking. Suction can be activated without the button and hold for a few seconds, until the Led starts blinking. Suction can be activated without
operating the brush control lever, by pressing the button and holding for a few seconds, until the Led operating the brush control lever, by pressing the button and holding for a few seconds, until the Led
begins to blink. In this mode, detergent delivery can also be activated by pressing the relative button begins to blink. In this mode, detergent delivery can also be activated by pressing the relative button
! ATTENTION
safety measures most appropriate to the situation.
i INFORMATION i INFORMATION
EN 21