Batteries: Removal; Lifting And Transporting The Machine; Practical Guide For The Operator; Controls - Description - Tennant CS16 Bedienungsanleitung

Make sure the dirty water tank is empty and empty it if necessary (see relevant paragraph).
have previously removed the suction hose and dirty water tank drain hose from their housings.
Mount the batteries on the machine using lifting means suitable for their weight.

Batteries: removal

When removing the batteries, the operator must be equipped with suitable personal protection devices
(gloves, goggles, overalls, safety shoes, etc) to reduce the risk of accidents. Make sure the switches on
do not short circuit the battery poles, do not cause sparks and do not smoke. Proceed as follows:

Lifting and transporting the machine

All phases of lifting and moving must be performed in an adequately illuminated en-
vironment with the adoption of the safety measures most appropriate to the situation.
The operator must always use personal protection devices.
To load the machine onto a means of transport, proceed as follows:
place the packaging on the pallet.

PRACTICAL GUIDE FOR THE OPERATOR

Controls - Description

cable is connected to the mains.
indicate the level of battery charge. There may be: indicate the level of battery charge. There may be:
WARNING
DANGER
WARNING
EN 23