Using The Timer Function; Setting The Timer With Automatic Switch-Off Of One Or More Cooking Zone(S) - KKT KOLBE EB8013ED Benutzerhandbuch

Using the timer

4. Using the timer function

4.1 Setting the timer with automatic switch-off
of one or more cooking zone(s)
• Select the desired cooking zone with the corresponding
selection key. If not already done, set the desired power level.
• While the cooking zone indicator is still flashing, press the
timer key. The timer display will show
• As long as the tim display is flashing, you can adjust it
by using the
Briefly pressing the keys will change the time setting in 1-
minute increments, long presses in 10-minute increments.
• After 3 seconds without further input,
the set time is automatically confirmed.
The countdown starts and the timer display
will show the remaining time.
To mark the selected zone, a flashing dot next to the
corresponding power display lights up.
• After the set time has expired,
the corresponding cooking zone is automatically switched off.
Note: Other previously set cooking zones remain unaffected
by the timer and remain in operation.
Canceling and changing the time setting
• To delete the time setting, press the corresponding cooking
zone selection key and then press the Timer key again.
The remaining time display switches to
• As long as the time display of the timer is blinking, you can now
change it by resetting it as described above.
• After 3 seconds without any further entry with time display
the time display switches off and the timer is cleared.
68
and keys.
.
.
,