KKT KOLBE EB8013ED Benutzerhandbuch Seite 137

Installation
9.4 Inserting the hob
Note: On the outside of the hob there are ventilation openings.
When inserting the hob, make absolutely sure that they are not
blocked by the worktop.
Fixing the hob using the mounting brackets
• Place the hob on a stable, smooth surface
(For example, use the packaging as a base).
• Make sure that no pressure is exerted on the elements
protruding from the hob.
• Screw 4 mounting brackets to the bottom base of the hob
as shown in the figure:
Installation of heat protection below the hob
If the hob is installed above a drawer, furniture compartment
or similar, or if the hob is accessible from below:
• Install a protective plate of heat-resistant material
(e.g. made of perforated plate to ensure ventilation)
at a minimum distance of at least 50 mm below the hob
(see illustration).
• When using adhesive, make sure that the temperature
resistance is 150°C.
C
B
D A
E
B
A
D
F
A Screw
B Mounting bracket
C Screw hole
D Bottom base
E Glass ceramic plate
F Worktop
Note:
Illustrations
may vary
max.5mm
!
min.50mm
max.5mm
81